Yamaha Motorcyes . org - Yamaha Motorcycle Information

2005 Yamaha XL700 Pictures & Specs


2005 Yamaha XL700 Pictures & Specs

Yamaha XL700 Specifications

  • Yamaha XL700 MSRP: $6,499
  • Yamaha XL700 Specifications:
  • Rated Horsepower: 80 hp @ 6,250 rpm
  • Engine Type: 2-Cylinder, 2-Stroke
  • Bore/Stroke: 81mm x 68mm
  • Displacement: 701cc
  • Fuel: Regular Unleaded
  • Type of Intake: Reed Valve
  • Type of Scavenging: Loop-Charged
  • Type of Exhaust: Wet
  • Type of Lubrication: Oil Injection
  • Mixing Ratio: 50:1 W.O.T.
  • Cooling: Water
  • Starting: Electric
  • Ignition: Digital

  • Compression Ratio: 7.2:1
  • Carburetor/Injection: (2) Mikuni Super BN 38
  • Spark Advance:
  • Ignition Timing: 15º BTDC – 22º BTDC
  • Spark Plug: BR8HS
  • Pump: 155mm Axial Flow Single Stage
  • Transmission: Direct Drive From Engine
  • Impeller: 3-Blade, Stainless Steel (11/14 pitch)
  • Length: 124″ (3.15m)
  • Width: 49.2″ (1.25m)
  • Height: 41.3″ (1.05m)
  • Seat Length: 61.4″/51.6″ (1.56m/1.31m)
  • Dry Weight: 551lbs (250kg)
  • Fuel Capacity: 13.2 gal (50L)
  • Reserve Fuel Capacity: 3.1 gal (12L)
  • Oil Capacity: 1 gal (3.8L)
  • Vehicle Capacity: 1, 2, or 3 person/ 528lbs (240kg)
  • Storage Capacity: 29.45 gal (111.6L)
  • Hull Material: SMC (Sheet Moulded Compound)
  • Warranty: 1 year limited warranty
  • Color: Calm Yellow Metallic
1 Comment
  • João Martins
    March 9, 2011
    Reply #1

    What is the speed of the jet ski yamaha xl700 hits?

Leave a Reply:




Latest Comments Sponsors
Sponsor Links
link arrows
Yamaha Motorcycle Archives RSS Yamaha Grizzly Forums
  • Correct HMF Optimizer Settings
    Hey everyone. Just joined the site. I'm from southeast Missouri. Recently bought a white 2017 Grizzly 700 EPS. I just installed an hmf performance...
  • Is it too deep man?
    My buddy there with renagade 1000 asked if it was too deep... i guess it was hahaha
  • Underground dog fencing questions
    I currently have an Innotek underground fence. The wire has broken twice in the last year. I replaced the whole boundary wire prior to the 2nd break....