Yamaha Motorcyes . org - Yamaha Motorcycle Information

2005 Yamaha XLT1200 Pictures & Specs


2005 Yamaha XLT1200 Pictures & Specs

Yamaha XLT1200 Specifications

  • Yamaha XLT1200 MSRP: $8,499
  • Yamaha XLT1200 Specifications:
  • Rated Horsepower: 155 hp @ 7,000 rpm
  • Engine Type: 3-Cylinder, 2-Stroke
  • Bore/Stroke: 80mm x 78mm
  • Displacement: 1176cc
  • Fuel: Regular Unleaded
  • Type of Intake: Reed Valve
  • Type of Scavenging: Loop-Charged
  • Type of Exhaust: Wet
  • Type of Lubrication: Oil Injection
  • Mixing Ratio: Variable (200:1 — 30:1)
  • Cooling: Open-Looped, Water
  • Starting: Electric
  • Ignition: Digital

  • Compression Ratio: 5.9:1
  • Carburetor/Injection: (3) Mikuni Super BN 44 with Accelerator Pump
  • Spark Advance:
  • Ignition Timing: 18º BTDC — 24º BTDC
  • Spark Plug: BR8ES-11
  • Pump: 155mm Axial Flow Single Stage with Q.S.T.S. and reverse
  • Transmission: Direct Drive From Engine
  • Impeller: 3-Blade, Stainless Steel (15.6 pitch)
  • Length: 124.4″ (3.16m)
  • Width: 48″ (1.22m)
  • Height: 44.5″ (1.13m)
  • Seat Length: 53.5″/43.7″ (1.36m/1.11m)
  • Dry Weight: 780lbs (354kg)
  • Fuel Capacity: 18.5 gal (70L)
  • Reserve Fuel Capacity: 3.1 gal (12L)
  • Oil Capacity: 1.45 gal (5.5L)
  • Vehicle Capacity: 1, 2, or 3 person/ 528lbs (240kg)
  • Storage Capacity: 23.45 gal (90L)
  • Hull Material: SMC (Sheet Moulded Compound)
  • Warranty: 1 year limited warranty
  • Color: Maple Red; Carbon Silver Metallic
No comments currently exist for this post.
Leave a Reply:




Latest Comments Sponsors
Sponsor Links
link arrows
Yamaha Motorcycle Archives RSS Yamaha ATV Forums
RSS Yamaha Rhino Forums
  • 660 rebuild
    Ok so I'm thinking about doing a quick top end rebuild on my 07 660 now before I tear in to this I have been trying to do as much research. As I...
  • 4WD electrical problems
    so my 4wd does not work. here are the facts -2007 rhino 660 -the fuse block has 12v and the fuse has been replaced. -the 4wd switch has been...
  • Recognize this windshield ?
    My "new to me" Rhino has the windshield below but I cannot seem to locate the brand or mfg. it has three sections where the middle section can fold...
RSS Yamaha Grizzly Forums
  • Niche industries axles
    Hey guys, one of my forst posts here. Bear with me? Looking for some input.Recently bent my oem rear left axle on my 2015 grizz with 3500km's. so got...
  • 09/450 top end / big bore kits
    After the last snow fall dumped close to 3ft in north east pa. my little 450 was tasked with a lot of plowing and has become dubbed "Old Smoky". I'ts...
  • Hitch Flange Bolt Size
    Hi guys, I've got a 2014 Grizzly 700 EPS, and lost two flange bolts while struggling to get a good mount with a receiver hitch. Can someone tell...