Yamaha Motorcyes . org - Yamaha Motorcycle Information

2006 Yamaha FZ6 Pictures & Specs


2006 Yamaha FZ6 Pictures & Specs

Yamaha FZ6 Specifications

  • Yamaha FZ6 MSRP: $6,799
  • Yamaha FZ6 Engine:
  • Type: 600cc, liquid-cooled, DOHC, inline 4-cylinder, 16 valves
  • Bore x Stroke: 65.5 x 44.5mm
  • Compression Ratio: 12.1:1
  • Carburetion: Group Fuel Injection, 36mm throttle bodies
  • Ignition: Digital TCI
  • Transmission: 6-speed w/multi-plate clutch
  • Final Drive: #530 O-Ring Chain

  • Yamaha FZ6 Chassis:
  • Suspension/Front: 43mm telescopic fork, 5.1″ travel
  • Suspension/Rear: Single shock, adjustable preload; 5.1″ travel
  • Brakes/Front: Dual 298mm floating discs w/2-piston pin slide calipers
  • Brakes/Rear: 245mm disc w/single-piston caliper
  • Tires/Front: 120/70-ZR17
  • Tires/Rear: 180-55-ZR17
  • Yamaha FZ6 Dimensions:
  • Length: 82.5″
  • Width: 29.5″
  • Height: 47.8″
  • Seat Height: 31.3″
  • Wheelbase: 56.7″
  • Rake (Caster Angle): 25.0º
  • Trail: 3.8″
  • Fuel Capacity: 5.1 gallons
  • Dry Weight: 410 lbs.
  • Yamaha FZ6 Other:
  • Warranty: 1 Year (Limited Factory Warranty)
No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives
Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • where to ride in york pa ?
    anyone that can provide information as where to riding in york pa. […]
  • Did some port work today
    Here are some pics... Let me know what you think guys :)) Image: http://i434.photobucket.com/albums/qq61/Scout8847/warriorporting005.jpg ... […]
  • Lowering the warrior
    Hey, Is this a good kit to lower a 93 warrior? And do I need anything else? Thanks ATV Yamaha Banshee Warrior Front and Rear Lowering Kit:eBay... […]
  • WTB :Warriror parts (skid plate ) ignition w/ key
    Hello.. I have a 93 warrior and I am looking for the rear skid plate and the ignition and key.. Thanks […]
  • bearing carrior removal
    2002 warrior trying to remove the carrier bearing and axle i broke the first nut loose but i heard somewhere they are cross threaded, i turned the... […]
RSS Yamaha Rhino Forums
  • Post parts you built/made
    I'm curious to see what custome parts people have built themselves. I have always liked to try and come up with my own things and i enjoy seeing... […]
  • New guy from VA/PA
    Hey guys, picking up a 2009 Rhino 450 camo on Tuesday. This will be my first UTV. Cant wait to hit the trail with it. Just popped in here to say hi […]
  • new friend need help
    Hi Guys, I'm new to this forum and I need your help with my ride. I hve 2009 rhino 700 with those mods: Dynatek AC Racing / Flow Exhaust K&N... […]
  • wheel lugnut stud
    I snapped a wheel stud taking off my rear wheel and need to know where to get a new one fast and cheap. I pressed the broken stud out of the hub... […]
  • Custom Rhino Cage + Bed Delete Kit, Fits 2007-2009 Rhinos
    Built by Funco from 1.75"/1.5" DOM, save 80+ pounds, get the safety of doors, and the custom look for half price without doing the fab work! This... […]
RSS Yamaha Grizzly Forums
  • Stolen Griz700 in Quebec
    I was talking to a hunter this fall, that lost his Griz700 which he had just financed. He made a trip to Quebec hunting, and his Griz700 was... […]
  • Few Pics of My Mountains!
    This is above Ruidoso NM on Monjou lookout. Just a few pics of riding up there this summer. Got any good mountain pics sure would love to see them.... […]
  • Brakes are locked up
    Hi. New to this group. I have a 2009 grizzly 550 with only 500 miles on it. The rear brakes have occasionaly made noise, but last weekend became a... […]
  • MX3000 Question
    I just received my winch and while going through the parts there is a large round rubber piece (about 2 inches across) in the kit that is not listed... […]
  • Stage one jet kit?
    I'm thinking of get a Dynojet kit for my 660, but now that I look at them, some say Stage 1. What does this mean? […]