2006 Yamaha Warrior Pictures & Specs | Yamaha Motorcycles .org - Yamaha Motorcycle & Yamaha Dirt Bike News & Information

July 15th, 2005 at 12:00 am

2006 Yamaha Warrior Pictures & Specs

Yamaha Warrior MSRP: $12,3 99
Yamaha Warrior Engine:
Type: 102 cubic-inch (1670cc), pushrod OHV, air-cooled, 48º V-twin
Bore x Stroke: 97mm x 113mm
Compression Ratio: 8.3:1
Ignition: Digital TCI
Transmission: 5-speed, close-ratio, w/multi-plate wet clutch
Final Drive: Belt
Fuel Delivery: Twin-bore Electronic Fuel Injection, w/throttle position sensor
Yamaha Warrior Chassis:
Suspension/Front: 41mm Kayaba inverted telescopic fork, 5.3″ travel
Suspension/Rear: Single shock, link-type w/adjustable preload and rebound damping; 4.3′ travel
Brakes/Front: Dual 298mm Discs
Brakes/Rear: 282mm Disc
Tires/Front: 120/70-ZR18 Radial
Tires/Rear: 200/50-ZR17 Radial
Yamaha Warrior Dimensions:
Length: 93.9″
Width: 36.8″
Height: 43.9″
Seat Height: 28.1″
Ground Clearance: 6.1″
Wheelbase: 65.6″
Dry Weight: 606 Lbs.
Fuel Capacity: 4 Gallons
Yamaha Warrior Other:
Warranty: 1 Year (Limited Factory Warranty)

No comments currently exist for this post.

Leave a Reply:

Sponsor Links

Latest Comments

Latest Previews

Yamaha Motorcycle Archives

Latest Reviews

won't turn over when hot
So I got it running and rode around the neighborhood to just test it out. Stalled once and tried to restart and it did not seem to have enough power... […]
Jetting carb with these mods also what size sprocket?
Well ordered my big bore kit today from powroll.com and below is a list of all the engine/performance mods I have decided to do to it. What size... […]
Anyone done a 446 CC big bore kit?
Has anyone done a 446cc big bore kit on there warrior? I mean I want to buy the kit but as far as assembly goes i can do it but what machining needs... […]
What year jug/cylinder will work on my quad?
I just ordered my big bore kit today. to shorten the downtime of my quad i was wondering who could tell me what cylinder/jug year range will work on... […]
will this air filter fit ?
i know the inside diameter is correct but it's 10 1/4" long i think the max length you can fit into the airbox is 6" ? […]

Door Latches
Anybody have a solution for the door latches not working. We do allot of mud riding and as soon as we go through the first hole and sand gets in the... […]
PDM clutch for stock setup
I have a PDM clutch (currently minus a spider) that I am looking at either selling as is, buying another PDM for parts, and/or buy a complete stock... […]
WTB PDM clutch kit/parts
I am currently running a PDM clutch but the billet aluminum spider has broken. I then ordered a complete new clutch from Comet but that spider only... […]
WTB complete clutch for 660..
As the title states, I am looking for a complete stock clutch setup for my '06 660. I am currently running a PDM clutch but like many other people,... […]
Do's and Don'ts for the Rhino
Guys, Being a relative newbie with the Rhino, I thought I'd ask some Q's. 1. WOT! My Rhino has some light mods, one of which is a Dynatec CDI.... […]

Should I rejet after cam and piston?
Just had a MB cam and Wiseco 11:1 piston installed and i assumed I would have more low end. But for some reason it still has lag at the bottom. I... […]
Gas tank venting problem
Saturday I was on a big ride and part of the way through the day my bike started spitting gas out the vent line. I extended the vent line off the... […]
YAMAHA BIG BEAR BRUIN KODIAK GRIZZLY YFM GUN BOOT MOUNT
YAMAHA BIG BEAR BRUIN KODIAK GRIZZLY YFM GUN BOOT MOUNT. as stated , its a gun scabbard mount . Original Yamaha item . Complete with all hardwear... […]
New here
Good day all,, just found this site and thought it would be neat to see what other Grizz owners do with their machines. Looking forward to going... […]
Going with the Zillas! Opinions on rim color for blue Grizz?????
I've decided to go with the Zillas over the BHs due to the fact that I ride in a variety of stuff, including a good bit of mud. Now I need to choose... […]