Yamaha Motorcyes . org - Yamaha Motorcycle Information

2006 Yamaha YZ250 Pictures & Specs


2006 Yamaha YZ250 Pictures & Specs

Yamaha YZ250 Specifications

  • Yamaha YZ250 MSRP: $6,199
  • Yamaha YZ250 Engine:
  • Type: 249cc, liquid-cooled, reed valve-inducted, 2-stroke
  • Bore x Stroke: 66.4 x 72mm
  • Compression Ratio: 9.1 — 10.6:1
  • Carburetion: 38mm Keihin PWK w/power jet & throttle position sensor
  • Ignition: Digital CDI
  • Transmission: 5-speed w/multi-plate wet clutch
  • Final Drive: #520 Chain

  • Yamaha YZ250 Chassis:
  • Suspension/Front: 48mm Kayaba inverted telescopic fork w/adjustable compression and rebound damping; 11.8″ travel
  • Suspension/Rear: Kayaba single shock w/adjustable preload, compression and rebound damping separate hi/lo-speed compression adjusters;12.4″ travel
  • Brakes/Front: 250mm Floating Disc
  • Brakes/Rear: 245mm Disc
  • Tires/Front: 80/100-21-51M Dunlop
  • Tires/Rear: 110/90-19-62M Dunlop
  • Yamaha YZ250 Dimensions:
  • Length: 85.7″
  • Width: 32.6″
  • Height: 51.4″
  • Seat Height: 39.1″
  • Wheelbase:: 58.3″
  • Ground Clearance: 15.0″
  • Rake (Caster Angle): 26.9º
  • Trail: 4.53″
  • Dry Weight: 211 Lbs.
  • Fuel Capacity: 2.1 Gallons
  • Yamaha YZ250 Other:
  • Main Jet: #178
  • Main Air Jet: #200
  • Jet Needle: N3EJ
  • Needle Jet: 2.9
  • Pilot Air Jet 1: #50
  • Pilot Outlet: 0.8
  • Pilot Jet: #50
  • Primary Reduction Ratio: 63/21 (3.000)
  • Secondary Reduction Ratio: 50/14 (3.571)
  • Gear Ratio – 1st Gear: 27/14 (1.929)
  • Gear Ratio – 2nd Gear: 23/15 (1.533)
  • Gear Ratio – 3rd Gear: 23/18 (1.278)
  • Gear Ratio – 4th Gear: 24/22 (1.091)
  • Gear Ratio – 5th Gear: 20/21 (0.952)
  • Gear Ratio – 6th Gear: Not Applicable
  • Warranty: 30 Day (Limited Factory Warranty)

No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • won't turn over when hot
    So I got it running and rode around the neighborhood to just test it out. Stalled once and tried to restart and it did not seem to have enough power... […]
  • Jetting carb with these mods also what size sprocket?
    Well ordered my big bore kit today from powroll.com and below is a list of all the engine/performance mods I have decided to do to it. What size... […]
  • Anyone done a 446 CC big bore kit?
    Has anyone done a 446cc big bore kit on there warrior? I mean I want to buy the kit but as far as assembly goes i can do it but what machining needs... […]
  • What year jug/cylinder will work on my quad?
    I just ordered my big bore kit today. to shorten the downtime of my quad i was wondering who could tell me what cylinder/jug year range will work on... […]
  • will this air filter fit ?
    i know the inside diameter is correct but it's 10 1/4" long i think the max length you can fit into the airbox is 6" ? […]
RSS Yamaha Rhino Forums
  • Door Latches
    Anybody have a solution for the door latches not working. We do allot of mud riding and as soon as we go through the first hole and sand gets in the... […]
  • PDM clutch for stock setup
    I have a PDM clutch (currently minus a spider) that I am looking at either selling as is, buying another PDM for parts, and/or buy a complete stock... […]
  • WTB PDM clutch kit/parts
    I am currently running a PDM clutch but the billet aluminum spider has broken. I then ordered a complete new clutch from Comet but that spider only... […]
  • WTB complete clutch for 660..
    As the title states, I am looking for a complete stock clutch setup for my '06 660. I am currently running a PDM clutch but like many other people,... […]
  • Do's and Don'ts for the Rhino
    Guys, Being a relative newbie with the Rhino, I thought I'd ask some Q's. 1. WOT! My Rhino has some light mods, one of which is a Dynatec CDI.... […]
RSS Yamaha Grizzly Forums
  • Should I rejet after cam and piston?
    Just had a MB cam and Wiseco 11:1 piston installed and i assumed I would have more low end. But for some reason it still has lag at the bottom. I... […]
  • Gas tank venting problem
    Saturday I was on a big ride and part of the way through the day my bike started spitting gas out the vent line. I extended the vent line off the... […]
  • YAMAHA BIG BEAR BRUIN KODIAK GRIZZLY YFM GUN BOOT MOUNT
    YAMAHA BIG BEAR BRUIN KODIAK GRIZZLY YFM GUN BOOT MOUNT. as stated , its a gun scabbard mount . Original Yamaha item . Complete with all hardwear... […]
  • New here
    Good day all,, just found this site and thought it would be neat to see what other Grizz owners do with their machines. Looking forward to going... […]
  • Going with the Zillas! Opinions on rim color for blue Grizz?????
    I've decided to go with the Zillas over the BHs due to the fact that I ride in a variety of stuff, including a good bit of mud. Now I need to choose... […]