Yamaha Motorcyes . org - Yamaha Motorcycle Information

2006 Yamaha YZF-R1 Pictures & Specs


2006 Yamaha YZF-R1 Pictures & Specs

Yamaha YZF-R1 Specifications

  • Yamaha YZF-R1 MSRP: $11,599
  • Yamaha YZF-R1 Engine:
  • Type: 998cc, liquid-cooled, 20-valve, DOHC, in-line four-cylinder
  • Bore x Stroke: 77 x 53.6mm
  • Compression Ratio: 12.4:1
  • Carburetion: Fuel injection, dual-valve throttle bodies with motor-driven secondary valves
  • Ignition: DC-CDI
  • Transmission: 6-speed w/multi-plate clutch
  • Final Drive: #530 O-Ring Chain

  • Yamaha YZF-R1 Chassis:
  • Suspension/Front: 43mm inverted telescopic fork w/adjustable preload, compression damping, rebound damping; 4.7″ travel
  • Suspension/Rear: Single shock w/adjustable preload, compression damping, rebound damping; 5.1″ travel
  • Brakes/Front: Dual 320mm discs; radial-mount forged 4-piston calipers
  • Brakes/Rear: 220mm disc w/single-piston pin-slide caliper
  • Tires/Front: 120/70-ZR17
  • Tires/Rear: 190/50-ZR17
  • Yamaha YZF-R1 Dimensions:
  • Length: 82.1″
  • Width: 28.3″
  • Height: 43.5″
  • Seat Height: 32.9″
  • Wheelbase: 55.7″
  • Rake (Caster Angle): 24.0º
  • Trail: 3.8″
  • Fuel Capacity: 4.75 gallons
  • Dry Weight: 381 lbs.
  • Yamaha YZF-R1 Other:
  • Main Jet: Not Applicable
  • Main Air Jet: Not Applicable
  • Jet Needle: Not Applicable
  • Needle Jet: Not Applicable
  • Pilot Air Jet 1: Not Applicable
  • Pilot Outlet: Not Applicable
  • Pilot Jet: Not Applicable
  • Primary Reduction Ratio: 65/43 (1.512)
  • Secondary Reduction Ratio: 45/17 (2.647)
  • Gear Ratio – 1st Gear: 38/15 (2.533)
  • Gear Ratio – 2nd Gear: 33/16 (2.063)
  • Gear Ratio – 3rd Gear: 37/21 (1.762)
  • Gear Ratio – 4th Gear: 35/23 (1.522)
  • Gear Ratio – 5th Gear: 30/22 (1.364)
  • Gear Ratio – 6th Gear: 33/26 (1.269)
  • Warranty: 1 Year (Limited Factory Warranty)
No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • Stupid Reverse Question
    How do you put it in reverse? I know reverse works because the guy I bought it from put it in reverse and backed it out of his garage. I have pulled... […]
  • Loss of power
    I did a wide open run today and for a split second about third gear i lost all power to the wheels then it caught and was fine and kept going. Any... […]
  • what cams to buy ?
    what mods would you run with a stage 3 cam ? Can i run it with stock internals ? also what about the barker intermediate Cam hows does it differ from... […]
  • Is the clutch on a warrior suposed to be real stiff?
    I went and looked at a 2000 warrior i was interested in and the clutch was so stiff it hurt to pull back. also the foot shifter was real loose and... […]
  • What clutch kit to handle my mods on my 98 warrior
    I plan to port and polish my head, 365cc 85mm bore kit, pod air filter no air box, oil cooler, rejet, hmf pipe, 14 tooth front sprocket and 40t rear,... […]
RSS Yamaha Rhino Forums
  • New here from Saskatchewan!
    Hey all I just picked up a new to me 06 660 Rhino! glad to be part of the gang here! […]
  • Smart as a 6th Grader
    A teacher asked her 6th grade class how many of them were Obama fans. Not really knowing what an Obama fan is, but wanting to be liked by the... […]
  • rollcage mounting ideas
    I was wanting to know how to mount a flush roof on my rhino without drilling into the rollcage? […]
  • running a vin
    HELLO could any of you run a rhino vin for the rhino i want im here to pick it up but just want to make sure before i do the vin is 5y4am04y65a009786 […]
  • Any Ideals on a New Stereo System
    Does anyone have any good ideals or pictures of their stereo systems installed in their Rhino's? I have been looking at the VDP sound bars... Does... […]
RSS Yamaha Grizzly Forums
  • Plastic Rivets Stink
    Is there something better on the market to replace the stock plastic panel rivets? Maybe I'm doing it wrong. Using a phillips screw driver to unscrew... […]
  • K&N oil Filters
    Good afternoon guys. Is anybody using K&N oil filters in there grizzlies. Or is mostly everybody using yamaha filters. Does anybody not recommend a... […]
  • Headlights
    I've done the search thing through 12 pages and can't find what I'm looking for. I want to change out the stock headlamp bulbs on my 700 with... […]
  • New toy...Brute Force 750
    Right place, right time.....got a deal on an 06 Brute and had to bring it home. It's all stock, with the carb engine and IRS. I've never been around... […]
  • 2000 Grizzly 600... Good deal??
    I am looking at a friends 2000 Grizzly. They have used it on a farm since new. It has about 1500 miles. Never had issues and had routine maintenance... […]