Yamaha Motorcyes . org - Yamaha Motorcycle Information

2007 Yamaha FX Cruiser Pictures & Specs


2007 Yamaha FX Cruiser Pictures & Specs

Yamaha FX Cruiser Specifications

  • Yamaha FX Cruiser MSRP Starting at :$10,499
  • Yamaha FX Cruiser Specifications:
  • Rated Horsepower 140 hp
    Engine Type 4-Cylinder, 4-Stroke
    Bore/Stroke 74mm x 58mm
    Displacement 998cc
    Fuel Regular Unleaded
    Type of Intake Spec Not Available
    Type of Scavenging Spec Not Available
    Type of Exhaust Wet
    Type of Lubrication Dry Sump
    Cooling Water
    Starting Electric
    Ignition TCI
    Compression Ratio 11.4:1
    Carburetor/Injection EFI (Electric Fuel Injection)
    Spark Advance Spec Not Available
    Ignition Timing 31° BTDC
    Spark Plug NGK CR9EB
    Pump 155mm High-Pressure Axial Flow
    Transmission Direct Drive from Engine
    Impeller 3-Blade, Stainless Steel (17 pitch)
    Length 131.5” (3.34m)
    Width 48.4” (1.23m)
    Height 48.8” (1.24m)
    Seat Length 66”/56” (1.67m/1.43m)
    Dry Weight 864 lbs (391.2 kg)
    Fuel Capacity 18.5 gal (70 L)
    Reserve Fuel Capacity Not Applicable
    Oil Capacity 1.32 gal (5 L)
    Vehicle Capacity 1, 2, or 3 person/ 529lbs (240 kg)
    Storage Capacity 26.4 gal (100 L)
    Hull Material SMC (Sheet Molded Compound)
    Warranty 1 year limited warranty
    Color Neptune Blue
Comments are closed.
Latest Comments Sponsors
Sponsor Links
link arrows
Yamaha Motorcycle Archives RSS Yamaha ATV Forums
RSS Yamaha Rhino Forums
  • 660 rebuild
    Ok so I'm thinking about doing a quick top end rebuild on my 07 660 now before I tear in to this I have been trying to do as much research. As I...
  • 4WD electrical problems
    so my 4wd does not work. here are the facts -2007 rhino 660 -the fuse block has 12v and the fuse has been replaced. -the 4wd switch has been...
  • Recognize this windshield ?
    My "new to me" Rhino has the windshield below but I cannot seem to locate the brand or mfg. it has three sections where the middle section can fold...
RSS Yamaha Grizzly Forums
  • Niche industries axles
    Hey guys, one of my forst posts here. Bear with me? Looking for some input.Recently bent my oem rear left axle on my 2015 grizz with 3500km's. so got...
  • 09/450 top end / big bore kits
    After the last snow fall dumped close to 3ft in north east pa. my little 450 was tasked with a lot of plowing and has become dubbed "Old Smoky". I'ts...
  • Hitch Flange Bolt Size
    Hi guys, I've got a 2014 Grizzly 700 EPS, and lost two flange bolts while struggling to get a good mount with a receiver hitch. Can someone tell...