Yamaha Motorcyes . org - Yamaha Motorcycle Information

2007 Yamaha V Star Classic Pictures & Specs


2007 Yamaha V Star Classic Pictures & Specs

Yamaha V Star Classic Specifications

  • Yamaha V Star Classic MSRP:$6,199 (Raven/Charcoal Flames)
    $6,099 (Candy Red)
    $6,099 (Pearl White)
  • Yamaha V Star Classic Engine:
  • Type 40 cubic-inch (649cc) air-cooled, SOHC, 70-degree V-twin
    Bore x Stroke 81mm x 63mm
    Compression Ratio 9.0:1
    Carburetion (2) 28mm Mikuni downdraft-type carburetors
    Ignition Digital TCI
    Transmission 5-speed
    Final Drive Shaft

  • Yamaha V Star Classic Chassis:
  • Suspension/Front Telescopic fork; 5.5" travel
    Suspension/Rear Single shock, link-type; w/adjustable preload; 3.9" travel
    Brakes/Front 298mm disc
    Brakes/Rear 200mm drum
    Tires/Front 130/90-16
    Tires/Rear 170/80-15
  • Yamaha V Star Classic Dimensions:
  • Length 96.5"
    Width 36.6"
    Height 43.5"
    Seat Height 28"
    Wheelbase 64"
    Ground Clearance 5.7"
    Dry Weight 505 lbs.
    Fuel Capacity 4.2 gallons.
  • Yamaha V Star Classic Other:
  • Warranty: 1 Year (Limited Factory Warranty)
No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives
Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • where to ride in york pa ?
    anyone that can provide information as where to riding in york pa. […]
  • Did some port work today
    Here are some pics... Let me know what you think guys :)) Image: http://i434.photobucket.com/albums/qq61/Scout8847/warriorporting005.jpg ... […]
  • Lowering the warrior
    Hey, Is this a good kit to lower a 93 warrior? And do I need anything else? Thanks ATV Yamaha Banshee Warrior Front and Rear Lowering Kit:eBay... […]
  • WTB :Warriror parts (skid plate ) ignition w/ key
    Hello.. I have a 93 warrior and I am looking for the rear skid plate and the ignition and key.. Thanks […]
  • bearing carrior removal
    2002 warrior trying to remove the carrier bearing and axle i broke the first nut loose but i heard somewhere they are cross threaded, i turned the... […]
RSS Yamaha Rhino Forums
  • Post parts you built/made
    I'm curious to see what custome parts people have built themselves. I have always liked to try and come up with my own things and i enjoy seeing... […]
  • New guy from VA/PA
    Hey guys, picking up a 2009 Rhino 450 camo on Tuesday. This will be my first UTV. Cant wait to hit the trail with it. Just popped in here to say hi […]
  • new friend need help
    Hi Guys, I'm new to this forum and I need your help with my ride. I hve 2009 rhino 700 with those mods: Dynatek AC Racing / Flow Exhaust K&N... […]
  • wheel lugnut stud
    I snapped a wheel stud taking off my rear wheel and need to know where to get a new one fast and cheap. I pressed the broken stud out of the hub... […]
  • Custom Rhino Cage + Bed Delete Kit, Fits 2007-2009 Rhinos
    Built by Funco from 1.75"/1.5" DOM, save 80+ pounds, get the safety of doors, and the custom look for half price without doing the fab work! This... […]
RSS Yamaha Grizzly Forums
  • Stolen Griz700 in Quebec
    I was talking to a hunter this fall, that lost his Griz700 which he had just financed. He made a trip to Quebec hunting, and his Griz700 was... […]
  • Few Pics of My Mountains!
    This is above Ruidoso NM on Monjou lookout. Just a few pics of riding up there this summer. Got any good mountain pics sure would love to see them.... […]
  • Brakes are locked up
    Hi. New to this group. I have a 2009 grizzly 550 with only 500 miles on it. The rear brakes have occasionaly made noise, but last weekend became a... […]
  • MX3000 Question
    I just received my winch and while going through the parts there is a large round rubber piece (about 2 inches across) in the kit that is not listed... […]
  • Stage one jet kit?
    I'm thinking of get a Dynojet kit for my 660, but now that I look at them, some say Stage 1. What does this mean? […]