2007 Yamaha Virago Pictures & Specs | Yamaha Motorcycles .org - Yamaha Motorcycle & Yamaha Dirt Bike News & Information

July 15th, 2006 at 12:00 am

2007 Yamaha Virago Pictures & Specs

Yamaha Virago 250 MSRP:$3,499Â (Black Cherry)
Yamaha Virago 250 Engine:
Type 249cc, air-cooled, SOHC, 60-degree V-twin
Bore x Stroke 49mm x 66mm
Compression Ratio 10:1
Carburetion 26mm Mikuni
Ignition Digital TCI
Transmission 5-speed
Final Drive Chain

Yamaha Virago 250 Chassis:
Suspension/Front 33mm telescopic fork; 5.5" travel
Suspension/Rear Twin shocks w/adjustable spring preload; 3.9" travel
Brakes/Front 282mm disc
Brakes/Rear 130mm drum
Tires/Front 3.00-18
Tires/Rear 130/90-15
Yamaha Virago 250 Dimensions:
Length 86.2"
Width 32.1"
Height 44.9"
Seat Height 27"
Wheelbase 58.7"
Ground Clearance 5.7"
Dry Weight 302 lbs
Fuel Capacity 2.5 gallons
Yamaha Virago 250 Other:
Warranty: 1 Year (Limited Factory Warranty)

No comments currently exist for this post.

Leave a Reply:

Sponsor Links

Latest Comments

Latest Previews

Yamaha Motorcycle Archives

Latest Reviews

Throttle cable help
Throttle Cable help I just replaced my stock 26mm carbs with some OKO 28mm flatsides is there a different throttle cable i have to get it has a stock... […]
87 warrior-gas coming out the breather tube??...PLEASE HELP!!
hey guys hope you can help me on this one...i started her up and couldnt figure out where the leak was coming from and turned out to be the breather... […]
warrior head???
i have a 2001 warrior that i melted the cam in. so i bought a full head off ebay but the head i got has a compression relief on it. will it still... […]
01 rappy no spark :-(
so i was riding my quad around the yard running just fine shut it off loaded it in the truck took it over to my friends unloaded it and it wouldn't... […]
Messed up piston ring?
I'm rebuilding my engine with a Venom piston and OEM cylinder. Went to put the cylinder on yesterday and seems somehow the 2nd compression ring got... […]

Can-am 08' 800 intake manifold
Intake off a Can-am 08' 800 motor in like new condition. No seals... intake only. Bought an 09' intake and don't need this one. $50 + shipping. Call... […]
Clutch cover has oil in it????
So my belt was slipping so I took the cover off. I found some oil in the clutch area. A decent amount. Any likley problem areas that u guys have seen... […]
Belt Direction
Hey you all, just a quick question, i did my clutch kit today, when i took the belt off the arrows were pointing at the front of the machine. When i... […]
complete canam 800 takeout
included will be the engine, trans, COMPLETE, cvt system, wiring, throttle body, coils, all switches, front and rear driveshafts,fuel lines and pump,... […]
Tuff Country Suspension Lift for '08 Rhino
Has anyone tried the Tuff Country Suspension Lift? If so, what is your review. It is 2". I want to lift my 08 Rhino but am concerned about axle... […]

WTB ITP wheels
Im looking for a set of itp wheels for my 03 grizz 660 they can be black or allum. Just geting started so im not trying to spend a lott of money. So... […]
oil weight question
Hi guys! I am new to the forum and have all kinds of newbe questions! I currently have a 2005 grizzly 660 and a 2008 grizzly 550. I ride in... […]
Cylinder Head and Bent Intake Valve
Hey Gang, I have a 2007 Grizzly 660. Previous owner sank and hydrolocked it. Crank was bent and two intake valves were bent. I replaced the... […]
Trail Search
Hey guys I am looking for GPS tracks. I am looking for the websites where tracks are uploaded. My searches so far have come up empty. It seems... […]
Grizzly 660 bumper
Looking for the front guard bumper for a grizzly 660. Let me know what you have and how much shipped to 70726. I need it to be in good shape. Send me... […]