Yamaha Motorcyes . org - Yamaha Motorcycle Information

2008 Yamaha Grizzly 350 Auto 4×4 Pictures & Specs


2008 Yamaha Grizzly 350 Auto 4x4 Pictures & Specs

Yamaha Grizzly 350 Auto 4×4 Specifications

  • Yamaha Grizzly 350 Auto 4×4 MSRP:$5,099 (Steel Blue) Available from June 2007
    $5,099 (Hunter Green) Available from June 2007
    $5,099 (Red) Available from June 2007
    $5,449 (Realtree® AP HD™ Camouflage) Available from September 2007
  • Yamaha Grizzly 350 Auto 4×4 Engine:
  • Type 348cc, 4-stroke, air-/oil-cooled single; SOHC
    Bore x Stroke 83.0mm x 64.5mm
    Compression Ratio 9.2:1
    Carburetion Mikuni 33mm BSR
    Ignition DC – CDI
    Starting System Electric w/auxiliary pull
    Transmission Yamaha Ultramatic® V-belt with front-/ rear-wheel engine braking/ F, N, R
    Engine Braking Front & rear wheel
    Drive Train Yamaha On-Command® pushbutton; 2WD, 4WD; shaft drive

  • Yamaha Grizzly 350 Auto 4×4 Chassis:
  • Suspension/Front Independent double wishbone; 5-way preload adjustment, 6.3-in travel
    Suspension/Rear Swingarm; 5-way preload adjustment, 7.1-in travel
    Brakes/Front Dual hydraulic discs
    Brakes/Rear Fully sealed drum
    Tires/Front AT25x8-12
    Tires/Rear AT25x10-12
  • Yamaha Grizzly 350 Auto 4×4 Dimensions:
  • L x W x H 78.1 x 42.7 x 44.1 in
    Seat Height 32.6 in
    Wheelbase 48.5 in
    Turning Radius 118 in
    Ground Clearance 9.7 in
    Fuel Capacity 3.8 gal
    Dry Weight 536 lb
    Rack Capacity 88 lb Fr./176 lb Rr.
    Towing Capacity 1,102 lb
  • Yamaha Grizzly 350 Auto 4×4 Other:
  • Instrumentation None
    Lighting Dual 30W Krypton multi-reflector headlights & 21W/5W brakelight
zp8497586rq
Comments are closed.
Latest Comments Sponsors
Sponsor Links
link arrows
Yamaha Motorcycle Archives RSS Yamaha ATV Forums
  • Need help with breeze 125
    We recently acquired a Yamaha breeze for $100 on Craigslist. He said that he had had it for over a year and never got around to working on it so that...
  • Engine Puzzle
    Another engine puzzle being put back together at nFLOW. Contact us here at nFLOW for all of your engine/transmission reman needs. Don't forget we...
  • Help please!?!?!
    02' warrior have a bad pull to the right side. I had eye balled everything and cant figure out what is bent. I measured the frame from the ground up...
RSS Yamaha Rhino Forums
  • 2008 rhino 700 build
    Well I can tell you this it wasn't all done in a day but close to one month, tons of sweat, beer and some blood shed its finally getting close....
  • New Owner
    What's up everyone. Just bout my first rhino. Anyone know some decent trails here close to north Phoenix? I also want to buy new plastics for my...
  • 660 valve cover cracked at banjo
    My brother in law stripped the threads out of the oil port on my 660. I drilled and installed a Helicoil, I reinstalled the banjo and the valve cover...
RSS Yamaha Grizzly Forums
  • Handguard mounts????
    I should receive my Rox Riser 5inch combo any day now my question is I have Tri - Mount brackets for my powermadd star gaurds from what I'm reading...
  • 2007 grizzly 660
    Hello im new to the site . Im hoping for some help here . I have a 2007 grizzly 660 that is turning over hard ,ive put a new battery and solenoid ....
  • Help with drive axle coupler !!!
    New to the site, just purchased a 2006 grizzly 660 and I need to replace the front drive axle and couplers. I am about to place an order through part...