Yamaha Motorcyes . org - Yamaha Motorcycle Information

2008 Yamaha Grizzly 350 IRS Auto Pictures & Specs


2008 Yamaha Grizzly 350 IRS Auto Pictures & Specs

Yamaha Grizzly 350 IRS Auto Specifications

  • Yamaha Grizzly 350 IRS Auto MSRP: $5,599 (Steel Blue) Available from September 2007
    $5,599 (Hunter Green) Available from September 2007
    $5,599 (Red) Available from September 2007
    $5,949 (Realtree® AP HD™ Camouflage) Available from August 2007
  • Yamaha Grizzly 350 IRS Auto Engine:
  • Type 348cc, 4-stroke, air-/oil-cooled single; SOHC
    Bore x Stroke 83.0mm x 64.5mm
    Compression Ratio 9.2:1
    Carburetion Mikuni 33mm BSR
    Ignition DC-CDI
    Starting System Electric w/auxiliary pull
    Transmission Yamaha Ultramatic® V-belt with all-wheel engine braking/F, N, R
    Engine Braking All wheel
    Drive Train Yamaha On-Command® pushbutton; 3-way locking differential; 2WD, 4WD, locked 4WD; shaft drive

  • Yamaha Grizzly 350 IRS Auto Chassis:
  • Suspension/Front Independent double wishbone; 5-way preload adjustment, 6.3-in travel
    Suspension/Rear Independent double wishbone; 5-way preload adjustment, 7.1-in travel
    Brakes/Front Dual hydraulic discs
    Brakes/Rear Sealed wet brake
    Tires/Front AT25×8-12
    Tires/Rear AT25×10-12
  • Yamaha Grizzly 350 IRS Auto Dimensions:
  • L x W x H 78.5 x 43.1 x 44.1 in
    Seat Height 32.7 in
    Wheelbase 48.6 in
    Turning Radius 134 in
    Ground Clearance 9.6 in
    Fuel Capacity 3.8 gal
    Dry Weight 578 lbs
    Rack Capacity 88 lb Fr./176 lb Rr.
    Towing Capacity
    1,102 lbs.
  • Yamaha Grizzly 350 IRS Auto Other:
  • Instrumentation Speedometer, odometer
    Lighting Dual 30W Krypton multi-reflector headlights & 21W/5W brakelight
No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • Throttle cable help
    Throttle Cable help I just replaced my stock 26mm carbs with some OKO 28mm flatsides is there a different throttle cable i have to get it has a stock... […]
  • 87 warrior-gas coming out the breather tube??...PLEASE HELP!!
    hey guys hope you can help me on this one...i started her up and couldnt figure out where the leak was coming from and turned out to be the breather... […]
  • warrior head???
    i have a 2001 warrior that i melted the cam in. so i bought a full head off ebay but the head i got has a compression relief on it. will it still... […]
  • 01 rappy no spark :-(
    so i was riding my quad around the yard running just fine shut it off loaded it in the truck took it over to my friends unloaded it and it wouldn't... […]
  • Messed up piston ring?
    I'm rebuilding my engine with a Venom piston and OEM cylinder. Went to put the cylinder on yesterday and seems somehow the 2nd compression ring got... […]
RSS Yamaha Rhino Forums
  • Can-am 08' 800 intake manifold
    Intake off a Can-am 08' 800 motor in like new condition. No seals... intake only. Bought an 09' intake and don't need this one. $50 + shipping. Call... […]
  • Clutch cover has oil in it????
    So my belt was slipping so I took the cover off. I found some oil in the clutch area. A decent amount. Any likley problem areas that u guys have seen... […]
  • Belt Direction
    Hey you all, just a quick question, i did my clutch kit today, when i took the belt off the arrows were pointing at the front of the machine. When i... […]
  • complete canam 800 takeout
    included will be the engine, trans, COMPLETE, cvt system, wiring, throttle body, coils, all switches, front and rear driveshafts,fuel lines and pump,... […]
  • Tuff Country Suspension Lift for '08 Rhino
    Has anyone tried the Tuff Country Suspension Lift? If so, what is your review. It is 2". I want to lift my 08 Rhino but am concerned about axle... […]
RSS Yamaha Grizzly Forums
  • WTB ITP wheels
    Im looking for a set of itp wheels for my 03 grizz 660 they can be black or allum. Just geting started so im not trying to spend a lott of money. So... […]
  • oil weight question
    Hi guys! I am new to the forum and have all kinds of newbe questions! I currently have a 2005 grizzly 660 and a 2008 grizzly 550. I ride in... […]
  • Cylinder Head and Bent Intake Valve
    Hey Gang, I have a 2007 Grizzly 660. Previous owner sank and hydrolocked it. Crank was bent and two intake valves were bent. I replaced the... […]
  • Trail Search
    Hey guys I am looking for GPS tracks. I am looking for the websites where tracks are uploaded. My searches so far have come up empty. It seems... […]
  • Grizzly 660 bumper
    Looking for the front guard bumper for a grizzly 660. Let me know what you have and how much shipped to 70726. I need it to be in good shape. Send me... […]