Yamaha Motorcyes . org - Yamaha Motorcycle Information

2008 Yamaha Raptor 250 SE Pictures & Specs


2008 Yamaha Raptor 250 SE Pictures & Specs

Yamaha Raptor 250 SE Specifications

  • Yamaha Raptor 250 SE MSRP: $4,399 (Black/Orange)
  • Yamaha Raptor 250 SE Engine:
  • Type 249cc air-/oil-cooled 4-stroke; SOHC, 2 valves
    Bore x Stroke 74.0 x 58.0mm
    Compression Ratio 9.5:1
    Carburetion Mikuni 29mm BSR
    Ignition DC-CDI
    Starting System Electric
    Transmission 5-speed; wet multiplate clutch
    Drive Train 2WD; sealed O-ring chain, eccentric adjustment

  • Yamaha Raptor 250 SE Chassis:
  • Suspension/Front Independent double wishbone; 5-way preload-adjustable shocks, 7.5-in travel
    Suspension/Rear Swingarm, preload-adjustable, 7.9-in travel
    Brakes/Front Dual hydraulic disc
    Brakes/Rear Hydraulic disc
    Tires/Front AT20 x 7-10
    Tires/Rear AT19 x 10-9
  • Yamaha Raptor 250 SE Dimensions:
  • L x W x H 64.0 x 42.1 x 40.9 in
    Seat Height 28.7 in
    Wheelbase 43.7 in
    Ground Clearance 3.9 in
    Fuel Capacity 2.4 gal
    Dry Weight 313 lb
  • Yamaha Raptor 250 SE Other:
  • Lighting: Dual 30W Krypton Multi-reflector Headlights & 21/5W Brake light
  • Warranty: 6 Month (Limited Factory Warranty)
No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • hmf head pipe warpage?
    So I have a 2004 yfz450 with the hmf bill ballance pro full exhaust system. It didnt come with a heat sheild so instead of ordering I wrapped the... […]
  • Acerbis Blue/White Handguards w/ Mounts
    Acerbis blue/white handguards with aluminum mounts and all hardware. Came off my 660. Need cleaned, some minor scratches. 25$ shipped. ... […]
  • Custom Made Yamaha Coat/Shirt/Hat Hangers...sweet!!!!!!
    Custom made Yamaha Raptor Coat Hangers. Made from 14ga Steel Plate, Laser cut for accuracy, and prime painted grey. I designed these and cut them... […]
  • stator package off ebay! Anybody used one? Good or bad?
    Has anyone used these? They good or junk? Stator Ignition Coil CDI Gasket YFM350 Warrior 97-01 : eBay Motors (item 250592894672 end time... […]
  • dg xcellerator??
    hey all, just wondering if anyone has any experience with this exhaust? I was looking around and found one for a good price but didn't see much on... […]
RSS Yamaha Rhino Forums
  • New from Alabama
    Hi guys. Just ran across this forum while browsing for parts. I've had my Rhino for several years now, but mainly looked around on Planet Side X... […]
  • Benchmark performance
    Some of you know that I have had some serious motor trouble. It has been over a 6 month ordeal with everything from electrical to a complete crank... […]
  • B&A Motorsports has moved out West !!!
    B&A Motorsports has moved shops out west to 8552 N. Dysart Rd. in El Mirage AZ. We are just south of Olive on Dysart Rd.Are phone numbers are the... […]
  • New here, 'bout to embark on an overhaul
    Hey guys, found your forum by searching for a repair manual (great resource!) Got an '06 or so Rhino 660 that's been sitting since last summer after... […]
  • WTB: 5 gallon fuel cell
    Im looking for a 5 gallon fuel cell. Let me know what you have. Thanks […]
RSS Yamaha Grizzly Forums
  • Grizzly Milestone
    Today during my ride I hit 2 milestones. 500 miles and 50mph. Man I love my 550 eps. :icon_ laughup: […]
  • I found a Grizz!!
    :happy: I found this sweet ride yesterday. I went to one dealer and they only had camo and the se edition left. So I took a ride about 30 miles from... […]
  • Another reverse light ???
    So I got Another reverse light question. My Grizzly all of the sudden starte flashing its reverse light at meImage:... […]
  • 03 Big Bear rough idle
    This winter gremlins have entered my garage both my drz and big bear are having jetting issues. I noticed the The Big Bear was not right during a... […]
  • what size radiator hose
    hey guys i am installing a water temp gauge on my 700. first (for anyone who has done this) you install the sender in the upper radiator hose... […]