Yamaha Motorcyes . org - Yamaha Motorcycle Information

2008 Yamaha TT-R125E Pictures & Specs


2008 Yamaha TT-R125E Pictures & Specs

Yamaha TT-R110E Specifications

  • Yamaha TT-R110E MSRP:$1,849 (Team Yamaha Blue/White)
  • Yamaha TT-R110E Engine:
  • Type 110cc air-cooled 4-stroke, SOHC
    Bore x Stroke 51.0mm x 54.0mm
    Compression Ratio 9.3:1
    Carburetion VM16 x 1
    Ignition CDI
    Transmission Constant-mesh 4-speed/wet, multiple disc
    Final Drive Chain drive

  • Yamaha TT-R110E Chassis:
  • Suspension/Front Telescopic fork, coil spring/oil damper, 4.5-in travel
    Suspension/Rear Swingarm Monocross®, coil spring/gas-oil damper, 4.3-in travel
    Brakes/Front 95mm drum
    Brakes/Rear 110mm drum
    Tires/Front 2.50-14-4PR
    Tires/Rear 3.00-12-4PR
  • Yamaha TT-R110E Dimensions:
  • Length 61.6 in
    Width 26.8 in
    Height 36.3 in
    Seat Height 26.4 in
    Wheelbase 42.5 in
    Ground Clearance 7.1 in
    Dry Weight 152 lb
    Fuel Capacity 1.0 gal
  • Yamaha TT-R110E Other:
  • Warranty: 90 Day (Limited Factory Warranty)
Comments are closed.
Latest Comments Sponsors
Sponsor Links
link arrows
Yamaha Motorcycle Archives RSS Yamaha ATV Forums
  • Free Stickers!!!
    Yes free! Get your free Immortal ATV stickers. Just PM me your name and address and you will get some Immortal ATV stickers for free! Image:... […]
  • 98 banshee heavy blue smoke left sde exhaust
    I need some help. I bought a 98 banshee with no compression on one cylinder and very little on the other. I rebuit the topend and now its running...
  • Graphics templates for cutter/plotter
    Hey guys, I'm getting a vinyl cutter/plotter here soon and was wondering if anyone had or knew of a place to get the templates from. I'm not out to...
RSS Yamaha Rhino Forums
RSS Yamaha Grizzly Forums
  • Needle from Carb Question
    Broke down the carb in an 03 Grizzly 660 (Mikuni carb) Below is the needle I found inside. Based on the cleanliness of the carb, I can tell someone's...
  • Pipe joint assembly a.k.a. rollover valve
    Is anyone experiencing gas boiling or extreme pressure when releasing the gas cap. I have a 2014 yamaha grizzly 700 4X4 w EPS.
  • New belt recomendations
    What brand replacement belts has anybody tried--recommend? Bought my 13 grizz with track kit on it & the former owner told me he NEVER used low... […]
Blogroll