Yamaha Motorcyes . org - Yamaha Motorcycle Information

2008 Yamaha Vino Classic Pictures & Specs


2008 Yamaha Vino Classic Pictures & Specs

Yamaha Vino Classic Specifications

  • Yamaha Vino Classic MSRP: $1,949 (Raspberry Metalic) $1,949 (Liquid Silver)
  • Yamaha Vino Classic Engine:
  • Type 49cc liquid-/air-cooled 4-stroke single, SOHC, 3 valve
    Bore x Stroke 38.0mm x 43.5mm
    Compression Ratio 12.0:1
    Carburetion 14mm Teikei
    Ignition CDI
    Transmission V-belt automatic
    Final Drive V-belt

  • Yamaha Vino Classic Chassis:
  • Suspension/Front Telescopic fork, 2.3-in travel
    Suspension/Rear Single shock, 2.1-in travel
    Brakes/Front 110mm drum
    Brakes/Rear 110mm drum
    Tires/Front 90/90-10
    Tires/Rear 90/90-10
  • Yamaha Vino Classic Dimensions:
  • Length 65.6 in
    Width 24.8 in
    Height 39.6 in
    Seat Height 28.1 in
    Wheelbase 45.7 in
    Ground Clearance 3.3 in
    Dry Weight 166 lb
    Fuel Capacity 1.2 gal
  • Yamaha Vino Classic Other:
  • Color: Team Yamaha Blue/White; Raven w/Rocket Red Flames; Silver
  • Warranty: 1 Year (Limited Factory Warranty)
Comments are closed.
Latest Comments Sponsors
Sponsor Links
link arrows
Yamaha Motorcycle Archives RSS Yamaha ATV Forums
  • Transmission Fluid as Engine Oil?
    I am trying to see what I can do to reduce some of the noise from my 09 yfzr. The motor has been rebuilt along with some improvements. My engine...
  • Question about WR crank swap
    I've searched and searched about info on the swap but everything I've came across has talked about an 04-06 yfz. My bike is an 07 with a bad crank...
  • Yfm80 plastics
    Morning, I recently picked up a badger for my kiddos', but the plastics are shot. Does anyone have a good set of 90's era plastics? They were...
RSS Yamaha Rhino Forums
RSS Yamaha Grizzly Forums
  • GoPro settings
    Been playing with my Hero 4 Black. What settings have given you the best results? Wide or narrow field of view? 1080, 1440, fps?
  • valve adjustment 2011 700
    I am trying to get TDC but when I am looking at the cam I don't see the "i" mark A on the shaft. I see the mark on case. The mark on the camshaft...
  • Ghost 4x4 servo?!
    I did my due deligence and search first. One guy at the same issue but the OP didn't get back with a solution so I'll ask again. ...