Yamaha Motorcyes . org - Yamaha Motorcycle Information

2009 Yamaha Big Bear 250 Pictures & Specs


2009 Yamaha Big Bear 250 Pictures & Specs

Yamaha Big Bear 250 Specifications

  • Yamaha Big Bear 250 MSRP:$3,599 (Black Metalic) Available from August 2008
    $3,599 (Hunter Green) Available from August 2008
  • Yamaha Big Bear 250 Engine:
  • Type 230cc, 4-stroke, air-cooled single; SOHC
    Bore x Stroke 71.0mm x 58.0mm
    Compression Ratio 8.7:1
    Carburetion Mikuni 33mm BSR
    Ignition DC – CDI
    Starting System Electric w/auxiliary pull
    Transmission 5-speed w/reverse; automatic clutch
    Engine Braking Rear wheel
    Drive Train 2WD; shaft drive

  • Yamaha Big Bear 250 Chassis:
  • Suspension/Front McPherson strut, 4.9-in travel
    Suspension/Rear Swingarm; 5-way preload adjustment, 5.3-in travel
    Brakes/Front Dual hydraulic discs
    Brakes/Rear Fully sealed drum
    Tire/Front AT22×7-10
    Tire/Rear AT22×10-10
  • Yamaha Big Bear 250 Dimensions:
  • L x W x H 75.4 x 40.9 x 44.0 in
    Seat Height 30.7 in
    Wheelbase 46.1 in
    Turning Radius 114 in
    Ground Clearance 5.9 in
    Fuel Capacity 3.2 gal
    Dry Weight 456 lb
    Rack Capacity 66 lb Fr./99 lb Rr.
    Towing Capacity 728 lb
  • Yamaha Big Bear 250 Other:
  • Instrumentation None
    Lighting Dual 30W Krypton multi-reflector headlights & 21W/5W brakelight
    Warranty 6 Month (Limited Factory Warranty)
1 Comment
  • BEN
    November 24, 2009
    Reply #1

    ARE USE LOWKED IN PA,

Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • what cams to buy ?
    what mods would you run with a stage 3 cam ? Can i run it with stock internals ? also what about the barker intermediate Cam hows does it differ from... […]
  • Is the clutch on a warrior suposed to be real stiff?
    I went and looked at a 2000 warrior i was interested in and the clutch was so stiff it hurt to pull back. also the foot shifter was real loose and... […]
  • What clutch kit to handle my mods on my 98 warrior
    I plan to port and polish my head, 365cc 85mm bore kit, pod air filter no air box, oil cooler, rejet, hmf pipe, 14 tooth front sprocket and 40t rear,... […]
  • 03 vs 05. Any real differances?
    Im looking at a 05 660 but also found a real nice 03. The 05 is all stock and looks new. The 03 looks nice but has a gytr pipe, k&n filter and works... […]
  • Dasa just installed on my 09 450r
    It's a fuel injected model. Do I need to get it re-mapped or anything? It has a slight backfire and stalled on me a couple times when I took it... […]
RSS Yamaha Rhino Forums
RSS Yamaha Grizzly Forums
  • New toy...Brute Force 750
    Right place, right time.....got a deal on an 06 Brute and had to bring it home. It's all stock, with the carb engine and IRS. I've never been around... […]
  • 2000 Grizzly 600... Good deal??
    I am looking at a friends 2000 Grizzly. They have used it on a farm since new. It has about 1500 miles. Never had issues and had routine maintenance... […]
  • Ides for clutch holding tool
    As the title says I'm looking for a good way to hold the sheaves when I put the modded clutches back on. I have the Yamaha part number for the tool... […]
  • When in high gear feels like low
    Just bought this 02 660 grizzly, My problem is when I select the High it dont seem to be in high goes very slow and engine RPMs go up but like it is... […]
  • What's your favorite Big Bore?
    I know this is a Grizzly site. But it is the most viewed forum I read, thinking more than just Grizzly owners visit this site. So, what is your... […]