Yamaha Motorcyes . org - Yamaha Motorcycle Information

2009 Yamaha Grizzly 700 FI Auto. 4×4 EPS Special Edition Pictures & Specs


2009 Yamaha Grizzly 700 FI Auto. 4x4 EPS Special Edition Pictures & Specs

Yamaha Grizzly 700 FI Auto. 4×4 EPS Special Edition Specifications

  • Yamaha Grizzly 700 FI Auto. 4×4 EPS Special Edition MSRP:$9,199 (Red Midnight Armor) Available from July 2008
  • Yamaha Grizzly 700 FI Auto. 4×4 EPS Special Edition Engine:
  • Type 686cc, 4-stroke, liquid-cooled single; SOHC, 4 valves
    Bore x Stroke 102.0mm x 84.0mm
    Compression Ratio 9.2:1
    Carburetion Yamaha Fuel Injection (YFI), 44mm
    Ignition 32 Bit ECU
    Starting System Electric
    Transmission Yamaha Ultramatic V-belt with all-wheel engine braking/H, L, N, R, P
    Drive Train Yamaha On-Command pushbutton; 3-way locking differential; 2WD, 4WD, locked 4WD; shaft drive

  • Yamaha Grizzly 700 FI Auto. 4×4 EPS Special Edition Chassis:
  • Suspension/Front Independent double wishbone; 5-way preload adjustment, 7.1-in travel
    Suspension/Rear Independent double wishbone; 5-way preload adjustment, 9.5-in travel
    Brakes/Front Dual hydraulic disc
    Brakes/Rear Dual hydraulic disc
    Tires/Front AT25 x 8-12 w/aluminum wheels
    Tires/Rear AT25 x 10-12 w/aluminum wheels
  • Yamaha Grizzly 700 FI Auto. 4×4 EPS Special Edition Dimensions:
  • L x W x H 81.3 x 46.5 x 48.8 in
    Seat Height 35.6 in
    Wheelbase 49.2 in
    Turning Radius 126 in
    Ground Clearance 11.8 in
    Fuel Capacity 5.3 gal
    Dry Weight 600 lb
    Rack Capacity 99 lb Fr./187 lb Rr.
    Towing Capacity 1322 lb
  • Instrumentation Digital LCD multifunction display: speedometer, odometer, dual tripmeter, hourmeter, clock, fuel gauge, gear position, EPS and EFI function
    Lighting Dual 35W Halogen multi-reflector headlights & 21W/5W brakelight
    Warranty 6 Month (Limited Factory Warranty)
No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • Throttle cable help
    Throttle Cable help I just replaced my stock 26mm carbs with some OKO 28mm flatsides is there a different throttle cable i have to get it has a stock... […]
  • 87 warrior-gas coming out the breather tube??...PLEASE HELP!!
    hey guys hope you can help me on this one...i started her up and couldnt figure out where the leak was coming from and turned out to be the breather... […]
  • warrior head???
    i have a 2001 warrior that i melted the cam in. so i bought a full head off ebay but the head i got has a compression relief on it. will it still... […]
  • 01 rappy no spark :-(
    so i was riding my quad around the yard running just fine shut it off loaded it in the truck took it over to my friends unloaded it and it wouldn't... […]
  • Messed up piston ring?
    I'm rebuilding my engine with a Venom piston and OEM cylinder. Went to put the cylinder on yesterday and seems somehow the 2nd compression ring got... […]
RSS Yamaha Rhino Forums
  • Can-am 08' 800 intake manifold
    Intake off a Can-am 08' 800 motor in like new condition. No seals... intake only. Bought an 09' intake and don't need this one. $50 + shipping. Call... […]
  • Clutch cover has oil in it????
    So my belt was slipping so I took the cover off. I found some oil in the clutch area. A decent amount. Any likley problem areas that u guys have seen... […]
  • Belt Direction
    Hey you all, just a quick question, i did my clutch kit today, when i took the belt off the arrows were pointing at the front of the machine. When i... […]
  • complete canam 800 takeout
    included will be the engine, trans, COMPLETE, cvt system, wiring, throttle body, coils, all switches, front and rear driveshafts,fuel lines and pump,... […]
  • Tuff Country Suspension Lift for '08 Rhino
    Has anyone tried the Tuff Country Suspension Lift? If so, what is your review. It is 2". I want to lift my 08 Rhino but am concerned about axle... […]
RSS Yamaha Grizzly Forums
  • WTB ITP wheels
    Im looking for a set of itp wheels for my 03 grizz 660 they can be black or allum. Just geting started so im not trying to spend a lott of money. So... […]
  • oil weight question
    Hi guys! I am new to the forum and have all kinds of newbe questions! I currently have a 2005 grizzly 660 and a 2008 grizzly 550. I ride in... […]
  • Cylinder Head and Bent Intake Valve
    Hey Gang, I have a 2007 Grizzly 660. Previous owner sank and hydrolocked it. Crank was bent and two intake valves were bent. I replaced the... […]
  • Trail Search
    Hey guys I am looking for GPS tracks. I am looking for the websites where tracks are uploaded. My searches so far have come up empty. It seems... […]
  • Grizzly 660 bumper
    Looking for the front guard bumper for a grizzly 660. Let me know what you have and how much shipped to 70726. I need it to be in good shape. Send me... […]