Yamaha Motorcyes . org - Yamaha Motorcycle Information

2009 Yamaha V Star 1100 Custom Pictures & Specs


2009 Yamaha V Star 1100 Custom Pictures & Specs

Yamaha V Star 1100 Custom Specifications

  • Yamaha V Star 1100 Custom MSRP:$9,190 (Candy Red) Available from June 2008; CA model from August 2008
    $9,290 (Raven – Midnight Custom) Available from June 2008; CA model from August 2008
  • Yamaha V Star 1100 Custom Engine:
  • Type 65-cubic-inch (1063cc) air-cooled 75° V-twin; SOHC, 2 valves/cylinder
    Bore x Stroke 95mm x 75mm
    Compression Ratio 8.3:1
    Carburetion (2) 37mm Mikuni; throttle position sensor
    Ignition TCI
    Transmission 5-speed, multiplate wet clutch
    Final Drive Shaft

  • Yamaha V Star 1100 Custom Chassis:
  • Fuel Capacity Steel; hidden shock
    Suspension/Front Telescopic fork; 5.5-in travel
    Suspension/Rear Single shock; adjustable preload, 4.5-in travel
    Brakes/Front Dual hydraulic disc, 298mm
    Brakes/Rear Hydraulic disc, 282mm
    Tires/Front 110/90-18
    Tires/Rear 170/80-15
    Wheels Laced
  • Yamaha V Star 1100 Custom Dimensions:
  • Length 94.7 in
    Width 35.2 in
    Height 43.3 in
    Seat Height 27.2 in
    Wheelbase 64.6 in
    Ground Clearance 5.7 in
    Fuel Capacity 4.5 gal
    Fuel Economy** 44 mpg
    Wet Weight 606 lb / C: 612 lb
  • Yamaha V Star 1100 Custom Other:
  • Warranty: 1 Year (Limited Factory Warranty)
No comments currently exist for this post.
Leave a Reply:




Sponsor Links
link arrows
Latest Comments Latest Previews
  • No posts found
Yamaha Motorcycle Archives Latest Reviews
  • No posts found
RSS Yamaha ATV Forums
  • '07 Yamaha Big Bear no top end power
    I recently rebuilt the top end of my 400 because of a water hole that was alot deeper than i thought. There are 3 marks on the crank (I), (F) and... […]
  • Sellin my 03
    I bought this new in Nov. of 02. It's been through a few different incarnations since then. But right now it's as it appears in the pics I'll see... […]
  • Shifter
    Any suggestions on making the shifter lever any longer? I don't like how it's so close to the peg and im always having trouble with my boot getting... […]
  • 2003 Warrior Part Out
    I am parting an entire warrior 350. Let me know what you need. I'll ship anything that is reasonable to ship. (i.e. plastic would not be reasonable... […]
  • Wanted Wolverine within 200 miles of Central NJ
    I think I have a buyer for my Raptor this weekend. I'm looking for a nice Wolverine in the area of Central NJ. […]
RSS Yamaha Rhino Forums
RSS Yamaha Grizzly Forums
  • Help me choose - 14" or 12"???? Thanks.
    Well, I'm back after months of holding off on putting new wheels on my 700 Grizz. I think I've decided on the SS-212 machined wheels with 28"... […]
  • back fireing trouble
    I have a 2003 660 it will turn over but it back fires while you are cranking on it and it wont start can any one tell me what i need to do. […]
  • Anyone get the 26.5 rockers?
    Just wonderin if anyone got the 26.5 rockers and what the true height measurement is […]
  • Audiotube
    Built my 1st audiotube and it ROCKS! Read a few threads here to help me get through the construction and was easy project. Spent $100 to build and... […]
  • Just curious about some parts.
    Does anyone know if there is a company that makes beefier tie rods and ball joints for tie rod ends?? Me turning larger tires was just curious if... […]