2006 Models
-
2006 Yamaha Majesty Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Majesty Specifications Yamaha Majesty MSRP: $5,799 Yamaha Majesty Engine: Type: 400cc, liquid-cooled, DOHC, 4-valve, four-stroke single Bore x Stroke: 83x73mm Compression Ratio: 10.6:1 Carburetion: Suction Piston FI Ignition: CDI Transmission: Centrifugal clutch Final Drive: Double-cog V-belt (Automatic) Yamaha Majesty Chassis: Suspension/Front: 41mm Telescopic fork Suspension/Rear: ... more. -
2006 Yamaha Midnight Warrior Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Midnight Warrior Specifications Yamaha Midnight Warrior MSRP: $12,699 Yamaha Midnight Warrior Engine: Type: 102 cubic-inch (1670cc), pushrod OHV, air-cooled, 48º V-twin Bore x Stroke: 97mm x 113mm Compression Ratio: 8.3:1 Ignition: Digital TCI Transmission: 5-speed, close-ratio, w/multi-plate wet clutch Final Drive: Belt Fuel Delivery: Twin-bore Electronic Fuel Injection, w/thro... more. -
2006 Yamaha Morphous Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Morphous Specifications Yamaha Morphous MSRP: $5,199 Yamaha Morphous Engine: Type: 249cc, Liquid-cooled, 4-stroke, DOHC, 4-valve Bore x Stroke: 66.0mm X 73.0mm Compression Ratio: 10.8:1 Carburetion: FI Ignition: TCI Transmission: V-belt automatic Final Drive: Belt Yamaha Morphous Chassis: Suspension/Front: Telescopic fork Suspension/Rear: Unit swing Brakes/Front: Hydraulic singl... more. -
2006 Yamaha Nytro Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Nytro Specifications Yamaha Nytro MSRP: $8,699 Yamaha Nytro Engine: Type / Displacement / cc 4-Stroke, 973cc Cylinders: Three Cooling: Liquid Bore & Stroke / mm: 79.0 X 66.2 Intake Design: 2 Valves Carburetion: 40mm Keihin Carburetors Ignition: Digital T.C.I. with Throttle Position Sensor Exhaust: Rear Exhaust Clutch / Transmission: YVXC, Variable Ratio Disc. Brake Type: 4-Piston Hy... more. -
2006 Yamaha Pro Hauler 700 Auto. Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Pro Hauler 700 Auto. Specifications Yamaha Pro Hauler 700 Auto. MSRP: $4,499 Yamaha Pro Hauler 700 Auto. Engine: Type: 357cc, 4-Stroke Single, Forced Air Cooled, OHV Bore x Stroke: 85mm x 63mm Compression Ratio: 8.1:1 Carburetion: Mikuni BV26-18 Ignition: TCI Starting System: Electric, Pedal on/off Transmission: V-belt Automatic / Forward, Reversre Drive Train: 2WD; Gear Yamaha... more. -
2006 Yamaha PW50 Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha PW50 Specifications Yamaha PW50 MSRP: $1,099 Yamaha PW50 Engine: Type: 49cc, air-cooled, case reed-inducted, 2-stroke single Bore x Stroke: 40 x 39.2mm Compression Ratio: 6:1 Carburetion: 12mm Mikuni Ignition: CDI Transmission: Single-speed automatic Final Drive: Shaft Yamaha PW50 Chassis: Suspension/Front: Telescopic fork; 2.4" travel Suspension/Rear: Dual shocks; 2.0" travel ... more. -
2006 Yamaha PW80 Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha PW80 Specifications Yamaha PW80 MSRP: $1,299 Yamaha PW80 Engine: Type: 79cc, air-cooled, case reed-inducted, 2-stroke Bore x Stroke: 47 x 45.6mm Compression Ratio: 6.6:1 Carburetion: 15mm Mikuni Ignition: CDI Transmission: 3-speed w/automatic clutch Final Drive: Chain Yamaha PW80 Chassis: Suspension/Front: Telescopic fork; 4.3" travel Suspension/Rear: Single shock; 3.7" travel ... more. -
2006 Yamaha Raptor 350 Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Raptor 350 Specifications Yamaha Raptor 350 MSRP: $4,999 - $5,249 (Special Edition) Yamaha Raptor 350 Engine: Type: 348cc 4-Stroke Single, Air Cooled, SOHC Bore x Stroke: 83mm x 64.5mm Compression Ratio: 9.2:1 Carburetion: Mikuni 36mm BSR Ignition: DC - CDI Starting System: Electric Transmission: 6-Speed Manual Clutch w/ Reverse Drive Train: 2WD; Sealed O-Ring Chain Yamaha Rap... more. -
2006 Yamaha Raptor 50 Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Raptor 50 Specifications Yamaha Raptor 50 MSRP: $2,199 Yamaha Raptor 50 Engine: Type: 49cc, 4-Stroke Single, Air Cooled, SOHC Bore x Stroke: 39 x 41.4mm Compression Ratio: 10.0:1 Carburetion: Mikuni 16mm Ignition: CDI Starting System: Electric Transmission: Automatic / Forward, Neut. Drive Train: 2WD; Shaft Yamaha Raptor 50 Chassis: Suspension/Front: Leading Arm, 2.3" Suspensi... more. -
2006 Yamaha Raptor 700R Pictures & Specs
0 CommentsPosted by Yamaha Motorcycles on July 15th, 2005 at 12:00 am under 2006 Models
Yamaha Raptor 700R Specifications Yamaha Raptor 700R MSRP: $6,999 - $7,249 (Special Edition) Yamaha Raptor 700R Engine: Type: 686cc, 4-Stroke Single, Liquid Cooled w/ Fan, SOHC Bore x Stroke: 102mm x 84mm Compression Ratio: 9.2:1 Carburetion: Yamaha Fuel Injection (YFI) , 44mm Ignition: 16 Bit ECU Starting System: Electric Transmission: 5-Speed Manual Clutch w/ Reverse Drive Train: 2WD; Se... more.
|
- No posts found
- March 2010 (7)
- February 2010 (11)
- January 2010 (5)
- December 2009 (9)
- November 2009 (31)
- October 2009 (22)
- June 2009 (201)
- July 2006 (91)
- July 2005 (110)
- July 2004 (80)
- No posts found
Yamaha ATV Forums - HELP ASAP! NEED SOMEONE TO MEASURE THE STOCK BORE ON MIKUNI CARB!!I looked everywhere cannot find it and mine is being off rebuilt im trying to order a pod style filter but need to know in mm or in the bore of the... […]
- Throttle cable helpThrottle Cable help I just replaced my stock 26mm carbs with some OKO 28mm flatsides is there a different throttle cable i have to get it has a stock... […]
- 87 warrior-gas coming out the breather tube??...PLEASE HELP!!hey guys hope you can help me on this one...i started her up and couldnt figure out where the leak was coming from and turned out to be the breather... […]
- warrior head???i have a 2001 warrior that i melted the cam in. so i bought a full head off ebay but the head i got has a compression relief on it. will it still... […]
- 01 rappy no spark :-(so i was riding my quad around the yard running just fine shut it off loaded it in the truck took it over to my friends unloaded it and it wouldn't... […]
Yamaha Rhino Forums - wet clutchHey guys, im in need of some wet clutch parts, i need them A.S.A.P. please call and be local to SO. Cal... Thanks, Brett 949 742 0156. […]
- Muslims asked to choose "white" on census!WTF is this shit about? The more i hear about this census and how they're manipulating the results to make America look further impoverished, the... […]
- secondary boltI just bought a gold secondary spring and I can not get the bolt off that holds it all togethor. The bolt that holds the fan on. I have tried it in... […]
- Senators Want Timeout on MonumentsWashington, D.C. – Locally-produced collaboration and consensus should drive decisions made about changes in federal land use, say Idaho Senators... […]
- Dragonfire Takes the San Felipe 250Well the official results are in and as we expected the Dragonfire Nessy takes another Baja title. In this case the Production Nessy #1801 was about... […]
Yamaha Grizzly Forums - got the parts installedput a hmf optimizer and intake and a billet exaust tip on the 700 this morning. Definately has more snap […]
- New Member IntroJust a quick hi to all the folks out there. New member riding a Grizzly 700. First quad and loving it already! Going to accessorize right away... […]
- Snow tipsHey GC! I've been riding for about 10 years, this is my first Grizzly. I wanted to share my success in riding in snow, snow pack, and this may... […]
- extended warranty price!we just got the thing from yamaha for the extended warranty. they want $600 for the 2 year and 800 for the 4 year! are these normal prices or are... […]
- stripped screws on carb....I was installing a dyno jet kit on my grizzly and I stripped the screw heads trying to get the the main. any suggestions on how to get these screws... […]
